How to Care for Your NanoClear™ Anti-Fog Mask
Your NanoClear™ mask is designed to provide long-lasting clarity with its factory-applied anti-fog coating, offering up to 1,000 clear uses under proper care. While this coating is durable, it is not permanent, and how you handle, clean, and store your mask can impact its performance.
This guide will help you get the most out of your NanoClear™ mask and ensure a clearer, more enjoyable snorkeling experience.
Long-Lasting, Not Permanent
NanoClear™ provides long-lasting anti-fog performance, but over time, the coating can naturally wear. Factors such as saltwater, sand, sunscreen, oils, heat, scratches, and harsh cleaning can reduce its effectiveness.
Once the coating wears off, your mask can still be used like a standard snorkel mask. You can continue using pre-soak, rinsing, or anti-fog sprays to maintain clear vision.
The goal is simple: handle your mask gently to maximize the lifespan of the anti-fog coating.
Before First Use
Before your first swim:
Rinse the mask gently with fresh water.
Avoid scrubbing the inside of the lens—NanoClear™ is already applied at the factory.
Do not use toothpaste, abrasive cleaners, rough cloths, or strong chemicals.
Proper care from day one helps the coating last longer and keeps your lens crystal clear.
During Use
To protect your mask while snorkeling:
Avoid touching the inner lens. Oils, sunscreen, and dirt from fingers can reduce clarity.
Keep sand away from the lens. Sand can scratch the coating; rinse gently if sand gets on the mask.
Do not wipe the inside while dry. Dry wiping can damage the coating; rinse first if cleaning is needed.
After Every Swim
Rinse your mask with fresh water after every use to remove salt, chlorine, sand, and sunscreen. This protects the lens, silicone, strap, and buckles.
Simple after-use steps:
Rinse thoroughly with fresh water.
Shake off excess water gently.
Let the mask air dry in the shade.
Only store the mask once it is completely dry.
What Not to Do
Avoid these common mistakes to protect the NanoClear™ coating:
Scrubbing the inside of the lens.
Using rough towels or abrasive cloths.
Applying toothpaste or strong chemicals.
Leaving the mask in direct sunlight for extended periods.
Storing it wet in a sealed bag.
Placing heavy objects on top of the mask.
Allowing sand or sharp objects to rub against the lens.
These habits can shorten the life of the coating and reduce underwater clarity.
How to Store Your Mask
Proper storage helps maintain both lens clarity and mask shape.
Store in a clean, dry place.
Use a protective case or gear bag, especially for travel.
Keep away from sharp objects such as keys, shells, or tools.
Rinse and dry the mask before packing for beach trips or vacations.
When the Coating Starts to Wear
Over time, the anti-fog performance may diminish. This is normal.
Even after the coating naturally wears:
The mask is still fully usable.
Standard anti-fog methods like pre-soaking, rinsing, or sprays can restore clarity.
You can continue enjoying snorkeling without interruption.
Quick Care Checklist
After every snorkeling trip, follow this simple checklist:
Rinse with fresh water.
Avoid touching the inner lens.
Do not scrub the coating.
Air dry in the shade.
Store in a clean protective case.
Keep away from heat, sand, and sharp objects.
Better Care, Clearer Adventures
With gentle handling and proper storage, your NanoClear™ mask can deliver long-lasting clarity for many snorkeling adventures.
Treat the lens carefully, rinse after every swim, and store properly—so you can spend less time prepping and more time enjoying the water.
NanoClear™: long-lasting clarity, not permanent anti-fog.